水培植物90度泵出口装置

Hydroponic Pump Outlet 90-degrees

2024-03-23 21:52:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This adaptor swaps with the standard outlet and was designed to allow a hydroponic submersible water pump to outlet water at 90 degrees. The reason was to ensure that I could start the tubing with a half coil before it rises to the top of the hydroponic tower.

Thread is standard M20/2
Thread Family Metric Fine Pitch (MF)
Relevant Standards ISO 68-1, ISO 9651-1, ISO 965-2, ISO 261,DIN 13
Equivalent InchThread 13/16 - 12 12-UN

Print Settings

Printer brand:
Bambu Lab
Printer:
A1
Supports:
Yes
Notes:
Paint the supports to the bottom of the LIP and the bottom of the 90-degree portion of the outlet - do not allow auto supports as it will clog up the pipe/outlet

Post-Printing

Remove the supports carefully to not ruin the thread

How I Designed This

I used Fusion 360 - I am an absolute beginner. Sorry :(

Tags

水培植物90度泵出口装置

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Fidget Spinner - 单体打印 / 无需轴承
2023-03-26
破碎点3D模型工具包
2023-06-22
Spiral Silica Gel Screw Top Container
2024-03-12
3D模型: Lula
2024-04-07
多板结构胶带夹持器
2024-04-30

最热下载

最新模型