Enders 3 Neo BTT PI V1.2 外壳

Ender 3 Neo BTT PI V1.2 case

2024-03-23 22:06:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I really liked That_Jamie_S_Guy's pi case, but i couldn't get it to fit on my Neo, I also wanted to mount a BTT Pi in there. So I took heavily from his case and built my own. There is a little cutout on the right for an SD Card extension. I added a screenshot of the orientation I printed the case.

I will add more pictures as I continue this project. I've only finished the case. The PI is secured to the case with a couple of M2.5x4 screws. The lid is made for a 4010 Fan, this will be the trickiest part of the case, so I'd suggest making some extension wires to connect the fan if they're too short. I will add pictures later as I continue. There's also a small slit on the bottom of the case, I put that there to hopefully fit an SPI cable for the TFT35 SPI, I will use this case for that, https://www.thingiverse.com/thing:6478665

USB Cable - This is what I will use to connect the PI to the mainboard.
https://www.amazon.com/dp/B0BXY66P5R?ref=ppx_yo2ov_dt_b_product_details&th=1

SD Card extension -
https://www.amazon.com/gp/product/B07WWVBK8V/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
No
Supports:
Yes
Infill:
15
Notes:
I made my tests with .3 resolution, this doesn't matter much. As long as your printer is semi calibrated, everything will fit.

I made it for my Ender 3 on my Neptune, to clear any confusion.