SidecarT 游戏卡包盒（用于Atari ST系列电脑）
SidecarT Cartridge Case for Atari ST
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a case for Atari ST SidecartT cartridge - PCB rev. 2.1.0.
See the project website for details: https://sidecartridge.com/
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK4
- Rafts:No
- Supports:No
- Resolution:0.4 (you can use smaller nozlle to get nicer buttons)
- Filament brand:
eSUN
- Filament color:
violet
- Filament material:
PLA
- Notes:
Print as on the attached image. For nice lettering consider changing the bridging angle.
You can use filament swap change after 2nd layer to get letter visible (eg. on the buttons or top shelf)
The case uses latches to keep shell and hood together. For better fit, you can use M2.5 laptop screws. The hood is removable to enable firmware update when needed... Feel free to contact me if you want alternative version with the USB and reset hole exposed...
You can fill the LED holes on the RPi hood and top shell with a hot glue gun to create a nice diffuser. Before filling the hole with glue, place some tape to ensure the glue gets flushed with the part area - see the last photo.
License
SidecarT Cartridge Case for Atari ST
by me72_rafal is licensed under the Creative Commons - Attribution - Non-Commercial license.
联系我们
热门推荐
-
Arduino学习工作站2023-03-26 -
保时捷968型号前置和（敞篷）后置 4英寸扬声器支架2024-03-23 -
Gloomhaven 3D模型插件：按钮和小错误2024-03-30 -
达尔文飞行器四代折叠猴脚/着陆装置2024-04-07 -
3d打印的男人凉鞋2025-07-17
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
巴黎卢浮宫的三圣母像2025-07-16