带有把手的马桶刷3D模型

Handle (eg. for Toilet Brush)

2024-03-24 15:15:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Our toilet brush had a rather thin handle bar which was not so nice to handle, so I designed a handle for it which is more comfy to hold.

The design consists out of four parts: Two side shells which enclose and hold the original handle bar, a ring on the bottom and a knob on the top. The parts are assembled via threads, so no glew or screw is required. The threads are conical to hold the original handle bar tightly. Although the tolerances between the grip and the original handle bar are small, I inserted some small thin strips of foam to avoid slipping of the handle bar in the handle.

Of course the use of this handle or grip is not restricted to toilet brushs...