定制版3D插入附件:适用于原始觉醒板子游戏
Custom Board Game 3D Insert Addons for Primal The Awakening Board Game
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
INTRODUCTION
This project is a fan-made creation for the Board Game Primal The Awakening by Reggie Games.
I am offering this project to you the community for personnal use for free, despite the effort I put into it, including trials and errors.
I am more than happy to share it with any fan of the game.
However, if you find this addon useful to you, please consider making a small donation: paypal.me/NoradZero
Any donation helps support my creative process and various projects I am working on. A big thank you for considering it!
This project are 3D insert addons that allows you to store the tokens in a convenient way in the core box existing insert.
This project is considered final, i did a lots of testing, but if there are critical problems, I may consider addressing them for the benefit of everyone.
However, I haven't identified any significant issues; everything should work as expected.
IMPORTANT - INSTRUCTIONS
You want to print:
- Primal_Token_Box.stl (First slot in insert)
- Primal_Token_Box_B.stl (Second slot in insert)
Now for the tokens holder you can use "Primal_Token_Holder_A.stl" to have somewhat flush height with the tokens, since there was many tokens that came in quantity of 4 instead, i made a smaller tokens holder which refer to "Primal_Token_Holder_B.stl" file.
The downside of this is that there will be a small gap of 8-9mm on the top. You can print the top cover and put elastic bands to avoid any issues if the box is not upright.
However, if you prefer to fill all the place, you can go with "Primal_Token_Box_C_Full_Height.stl" and put "Primal_Token_Holder_B.stl" on top.
Only "Primal_Holder_Top.stl" is optional.. serve as a cover for the longer tokens holder.
PRINT SETTINGS - Cure 5.4
Layer Height 0.2
Infill 10% Gyroid
Temp 200
Build plate 60
Print Speed 80mm/s
No support
No build plate adhesion type
Enjoy!
How I Designed This




License
Custom Board Game 3D Insert Addons for Primal The Awakening Board Game
by NoradZero is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Blastech E-11 3D模型2023-03-26
-
复古风格闹钟架2023-03-26
-
Rlaarlo 917 GNSS 持有器2023-05-15
-
长犬2024-04-23
-
适用于MK2 Scirocco的三件式格栅夹具套装2024-05-06
最热下载
-
开源 1:10 四驱竞技型 RC 车2025-07-08
-
鸡蛋绘画机迷你(Eggbot衍生版)v1.12025-07-16
-
Kumonga的孩子与澳大利亚蜘蛛驯兽队2024-03-17
-
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23
最新模型
-
纸张 APC T132024-05-08
-
女巫女性2024-05-08
-
Mk2 一战菠萝手榴弹(改进版)2024-05-08
-
Casio SK-2100麦克风外壳2024-05-08
-
经典俄罗斯方块2024-05-06