全能单挂架

All in one hanger

2024-03-25 06:32:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Done for a class project - may not be the best design (the assignment is about how I market it, not the product itself.)

The clip object is used to attach to the bottom bar on the hanger. You can use this for shoes, a tie, or something else.

One improvement I might make would be adding a divot to the design for the clips to sit into so they don't slide left or right but I chose not to make it the default because the position of the divot would change depending on your choice of shoes (or other object).

I also made the hooks not an integral part of the hanger for ease of printing (if the hooks were an integral part of the object, printing would be a hassle.

Standards

NGSS CCSS

Materials Needed

I recommend a stiff plastic for this to be printed with. ABS or PLA. PLA+ would be good but I know there's not one standard "PLA+." I guess you could use CF but that's a bit overkill for this.