5ml 注射器活塞

5ml Syringe Plunger

2024-03-25 07:29:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This was designed primarily for use with syringes of soldering flux, which typically come in 5ml, 10ml or 30ml syringes. The standard plungers with a rubber bottom will trap air in the syringe, resulting in way more flux being dispensed than desired. This syringe is designed to stay in place, without trapping air inside the syringe tube.

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament brand:
eSun
Filament color:
White
Filament material:
PLA+
Notes:
There are very small tolerances with this model. Too small and it falls out of the syringe, too big and it won't fit. If anything, it's probably better for it to be a little too big, and sand down the tip a little until it fits.

Given the height and the small base area, it may be necessary to print with a brim.

Tags

5ml 注射器活塞

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Fidget Spinner - 单体打印 / 无需轴承
2023-03-26
三星 Gear 无线充电器和手机的立架模型
2023-05-01
GMX曲线支架支持GoPro安装（或轻型结构）
2023-05-22
三星洗碗机轴（DD66-00022A）
2024-03-27
动漫角色3D模型：带面具的Animegao Kigurumi v3.5
2024-04-30

最热下载

Glock 17/34 Solidworks 模型文件
2023-04-21
SATA male THT 15-pin right-angle ATX power connector (3D files, f3d file, and KiCad files included)
2023-08-02
欧宝Zafira B倒挡锁止机构（倒挡防误入装置）
2024-04-02
适用于ebyte E104-BT5040U USB适配器的外壳
2024-04-28
原神优菈
2025-06-27

最新模型