Fret Presser for Cheap Arbor Press

2024-03-25 09:38:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Valdiom posted a pretty legit Caul for pressing frets.

I'd been using a cheap arbor press that I've had for some years now for some other projects. and as I was working on a project guitar i finally realized I could use it for this.

I took the cauls designed by Valdiom and just added some mass behind them and a post to attach it to my press without needing the metal bit.

The ones labeled "WIDE" are double the with at the mouth of the cauls. My thought process was you could maybe affix thin leather, neoprene or similar as padding to prevent marring the frets in case your print quality isn't perfect

My first print settings so far--
28% infill
5 walls, tops and bottoms
Random Seal Layer
Ironing all top surfaces
The post oriented DOWN so the caul is facing up
Supports needed

2 at these settings on my Bambu P1P is about 90min with calibration