Yokomo兼容电池座

Yokomo compatible battery holder

2024-03-26 03:55:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

If you want to use angle battery connectors in your Yokomo chassis, this design is for you. It is suitable for short lcg lipo/lihv batteries and fits in stock Yokomo SD 2.0. The battery is loaded from the top, and there are m3 holes to mount an additional rubber or other solution to hold it in place, but it is not required. To mount it you will need 4 x flat head m3 screws - you can use the screws from an original mount.
In chassis like yokomo SXIII you may need to grind it with a sandpaper or cut to fit a bigger spur gear.
Some short LCG lipos are so short that it may play a little bit, so you can add a layer of double sided tape to make it tighter.
Heve fun!