Hama Alpha60 Tripod Parts

2024-03-26 05:07:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have modified the piece to vary the printing position, using supports.
Calculating and developing the piece, as faithful as possible to the original, has taken time, much of the time has been turning it over in my head to think about how to print the piece in the position so that all its sections are as close as possible. possible firm after printing, if my speculations are correct... after all, it supports equipment (cameras and lenses) worth thousands of euros and there is no room for errors.
I didn't like the way the piece was printed at first, because the result gave me weaker parts of the piece. With a few simple modifications I was able to print the part again with a much more robust result, the STL file is generated in the correct printing position, I attach an image with an example of lamination using organic supports.