3dsjs

Floureon RT628/M-880耳塞支架

Floureon/Retevis/Topsung RT628/M-880 Earpiece Spacer

2024-03-26 09:40:09

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

I wanted to use a listen-only earpiece with my radio, but when I fully plugged it in it triggered the PTT until it was removed. I discovered that pulling the jack out slightly made it work, so I made a spacer for it, but it created another problem of plug retention since it no longer clicked into place.
I made this spacer plug into the unused charge port and grip the 2.5 mm jack to create good retention. The spacer can be left in the charge port while the jack gets inserted and removed holding down the jack side of the spacer.
It didn't seem like the volume actually changes on the earpiece so it's stuck at max volume, but I was using this at a loud festival so it worked out for me.

Tags

License

CC BY-NC

Floureon/Retevis/Topsung RT628/M-880 Earpiece Spacer
by rag3r0 is licensed under the Creative Commons - Attribution - Non-Commercial license.

Floureon RT628/M-880耳塞支架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢