CNCLess 超轻量级管状6英寸中等偏远距离FPV飞行器支架

CNCLess Ultra Light Tubular 6’ Mid Range FPV Frame

2024-03-26 11:53:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I want to design a super lightweight yet rigid 6-inch FPV frame. Inspired by Eyefly's designs, I believe utilizing materials like carbon tubes and 3D printed parts, which do not require CNC machining, is a very clever approach and the best way to enable everyone to enjoy a low-cost, high-performance FPV frame.
The frame utilizes lightweight 5mm carbon tubes and adopts a pre-stressed design to achieve sufficient rigidity. Through flight validation, this drone effectively suppresses low-throttle vibrations and exhibits no jello effect in the mid to high throttle range. With an 850mAh 6S LiPo, it achieves approximately 9 minutes of flight time, while with a 6S 5000mAh 21700 battery, the flight time can exceed 35 minutes. At 35% throttle, the cruising speed can be maintained at 50 km/h, making it well-suited for medium to long-distance flights.

Frame Specifications:
Motor Mount: 12mm x 12mm
Flight Controller Stack: 20mm x 20mm
Video Transmitter: 20mm x 20mm
Camera: 19mm
Weight: 55g

For the installation of the frame, please refer to the following diagrams for installing the printed parts. Please use 5x4 3K round carbon tubes. After completing all assembly steps, it's necessary to use instant glue or epoxy resin to bond the printed parts with the carbon tubes.

Tube Length