带有色板的叉车配件卡

Forklift Kit Card with Palette

2024-03-26 13:05:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I created this little kit card that assembles into a little forklift - complete with a mini palette!

The forks can slide up and down as well as tilt. Wheels should move freely.

Printed on a Prusa mk3 with the Palette Pro 3.

No supports needed (they are built into the model)

Finished model is pretty small - about 50mm in height.

I've included files in multiple parts for each color as well as a single color version.

For those of you without multicolor printers, I included one file with all the parts (without the frame) so you would need to break them apart yourself for each color you want.

Please note fitment may be different for different printers. Everything should snap in place, aside from the cabin which may need to be glued since the pillars are thin.

Some tests show the steering wheel and seat may be loose depending on your first layer Z height because of elephants feet. Adjusting that may help with proper fitment.

I'm always open to any suggestions for changes/improvements. If you have any, please leave them in the comments.

Check out my filament!

https://www.amazon.com/dp/B0C1GJDDZC?ref=myi_title_dp&th=1

Happy printing!