Ende3 S1 Pro 摄像头支架
Ender 3 S1 Pro camera bracket
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
NOTE: This will not fit with the standard bed handle. I use a simple ring pull fitted to the bed roller axle.
This is a simple push fit over the Y- axis belt tensioner bracket; allows access to the adjustment knob and the drawer.
It does overhang the build plate by around 20mm due to space limitations in my enclosure but could be simply amended not to do so.
Enclosed are two .stls- the original design (pictured) and one with a wider top plate and arm.
(Note that I changed the design slightly from the photo to ensure clearance on the drawer but I couldn't be bothered to reprint).
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1 Pro
- Rafts:No
- Supports:Yes
- Resolution:0.3mm
- Infill:15% Cubic
- Notes:
Auto orientaion shoud put this 'nose' down. I used grid support setting.
相关内容
联系我们
热门推荐
-
三维网格彩蛋模型2025-06-18 -
esk8电动滑板电池容器电池托盘3D模型2023-03-26 -
地心版怪兽型6x18针孔Gamera2023-03-27 -
业余无线电爱好者 - 线绕装置 / EFHW 统计装置2024-04-10 -
刀之站立2024-04-16
最热下载
-
Valorant 杰特的姿态2023-03-26 -
车身RC 1/10 全套2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
高跟鞋鞋架2025-07-17 -
裸女站立2025-07-16 -
丰满跪姿美熟女2025-07-16