iPhone 15加壳保护套（极简设计）

iPhone 15 plus bumper case (minimalistic)

2024-03-26 21:20:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Protects your phone and especially the camera bulge in the back against scratches and bumps while allowing the phone to cool properly when charging or in use.

Print Settings

Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
10%
Filament brand:
any
Filament color:
any
Filament material:
TPU
Notes:
- Print in TPU in the orientation shown in the screenshot.
- Raise bottom contact distance to 0.4 or deactivate the bottom interface layers to make supports easier to remove.
- Choose classical supports placed everywhere.
- Pick two top support interface layers with a separation of 0.2 mm and rectilinear pattern.
- I chose a bridging pattern angle of 60º and 70% infill/perimeter overlap to get successful bridging atop the supported areas.
- In Prusa Slicer 2.7.3+ make sure you enable the "detect bridging perimeters" section--but not in earlier versions where a bug causes perimeters to be printed outside supports.