游戏组件与私有信息

Game Pieces with Private Information

2024-03-26 21:50:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are models I made in my free time to create game pieces where each piece has private information. There are two principle versions here depending on how much time you have:

GamePieceWithBase_v3 is a full game piece and can be completed with a bit of paint or a sticker. It takes a while to print though and can likely be improved. There is a void in the bottom which you can friction fit a US Penny into to give the piece a satisfying amount of weight.

BaseClip_v3 and PennyClip_v2 are meant to be printed out together. If you're short on time, you can print these out very quickly and glue a folded paper game piece into the BaseClip model. Then, the base clip can be fit onto the PennyClip and the PennyClip ought to be able to hold a US Penny to give it some heft. I suggest liberal application of hot glue at all steps of construction for durability.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
No
Supports:
No
Resolution:
0.2mm
Filament brand:
Inland
Filament material:
PLA+
Notes:
The PennyClip was a bit hard to pry off the printer bed successfully, but trying to fix that problem was going to take longer than I wanted to spend on this project or increase the printing time to an unsatisfactory length. If someone figures out a good way to fix this without increasing print time very much then I hope that they'll drop me a line.

Post-Printing

How I Designed This

I grabbed a personal licence for Autodesk Fusion and made these as a learning experiment. I'm really just dipping my toes into 3D modeling/printing here, so I picked something simple for my goal. I'm sure that there are many ways to improve on these ideas.