Nesting Shobu Game

2024-03-27 01:29:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This thing is a version of the abstract strategy game Shobu with boards that nest into each other for easier storage. The pawns fit into the top and bottom lids which also nest into the boards on either side. Although it's not strictly necessary, I think the best finished print should be made in four colors as follows.

COLOR 1:
NestingBoardwithFillets (qty 2), LidSide1

COLOR 2:
NestingBoardwithFillets (qty 2), LidSide2

COLOR 3:
PawnwithFillets (qty 16)

COLOR 4:
PawnwithFillets (qty 16)

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40
Filament brand:
various
Filament color:
various
Filament material:
PLA
Notes:
Printed on an Ender-5 S1 at 80mm/s. The STL is sized to match the retail edition of the game published by Smirk & Dagger. I printed this at 79% in order to fit two boards and a lid on the build plate at one time. It's a good, manageable size.

This is likely obvious, but I'd suggest printing the boards with the playing surface on the build plate and the lids with the outside surface on the build plate.

Also, I'm certain this could be printed with much less infill, but I wanted to be sure the boards and lids stayed rigid.

Check out this other Thing

While this work is completely my own, there is another Shobu thing here that's worth checking out. If you don't want the nesting feature (or don't like how tall the boards have to be to allow for nesting), consider this one: https://www.thingiverse.com/thing:6285295/files

Our pawns are outrageously similar since, you know, that's how checkers pieces look, so if it's more appropriate to label this a remix...I'm sure someone out there will let me know.

Nesting Shobu Game

朋友，你觉得上面这个模型，属于下面的哪个分类？