玻璃板夹持装置

Glass Plate Vice

2024-03-27 02:13:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Glass plate vice for your polishing and cleaning needs. The STL can be scaled in your slicer for various sizes. E.g., if you scale it 50%, it would be a perfect little vice for up to 4x5 plates. At 100% it's just big enough to clamp an 8x10 plate on the short edge (8inch/20cm). The STL is just printable on a 256 x 256 x 256 mm printer (e.g., Bambu P1S, X1C at their default setting of 250mm print height limit). Obviously if you have a larger print volume, you can scale up to suit your needs.

Assembly should be self-explanatory, except for the knurled handle, which needs to be screwed on and bonded to the threaded shaft. I used a two-part epoxy glue.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
Yes
Supports:
No
Resolution:
0.18mm
Infill:
50%
Filament brand:
Bambu Labs
Filament color:
Black
Filament material:
PLA
Notes:
PLA is absolutely A-OK for this build. Infill probably could be lower too; you don't need to apply that much pressure to keep the glass plate in place.