Lalaloopsy Mini Adjustable Doll Display Stand

2024-03-27 07:32:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Lalaloopsy Mini Adjustable Doll Display Stand

Summary

A simple stand for Lalaloopsy Minis, with four different base styles; plain, button with a flat face, button with holes, and button with threads. The functional pieces of the stand are designed to be as small as possible while still providing adequate support to keep the doll firmly upright and prevent it from falling. I personally tested it on four Minis, including one of the boys (flatter feet) and one of the Oopsies (ballet feet) and had no issues with any of them. :)

How to Use

The stand comes in three parts--base, pole, and brace--and adjusts to accommodate the small variations in the Minis' heights. To stand up a Mini, put the brace at the top of the pole (angled side down) and slide the doll's neck into it. Arrange the doll's feet as desired, then push the brace down. The brace should be pressing down on the shoulders of the doll enough to gently wedge it in place while allowing the head to move freely. That's it!

Misc

Please do not sell the files or prints of the files, thank you!

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
Yes
Supports:
No
Resolution:
.2 mm
Infill:
15%
Filament brand:
Elegoo
Filament color:
White
Filament material:
PLA
Notes:
No supports needed, but a brim and/or glue is a strong recommendation. (The pole and brace are VERY SMALL.) Make sure your printer is well calibrated so the parts friction fit together neatly.