安奇比克Vyper纤维材料应力减少滚筒

Anycubic Vyper Filament Stress Reducer Pulley

2024-03-27 09:15:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I noticed there was quite a bit of strain being put on the filament when the nozzle was higher up on the build volume. I created this pulley to relieve the pressure a little bit.
I was also tired of sticking the filament through the sensor and then having to put it into the bowden tube after, I made an adapter so you can push the filament all the way through from the sensor. You will need a slightly longer piece of bowden tubing for that than what comes on the stock machine.

I modified the sensor bracket in Windows 3D Builder and for some reason the merge tool put a bunch of artifacts on everything... so its not too pretty but it is printable and functional.

For hardware you will need 2x m3 16mm screws, 2x m3 20mm screws and 2x m3 nuts. For the roller I would recommend getting a m3-m4 screw and nut but I did make a printable pin that can be used as well, but may be somewhat fragile.