ITX六边形盒子3D模型

ITX-hexBOX

2024-03-27 17:13:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A minimal and open ITX case with hexagonal pattern design I created to house my N100DC-ITX ASRock board.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1P
Rafts:
No
Supports:
No
Resolution:
Nozzle 0.40mm / Layer Height 0.20mm
Infill:
Gyroid 15%
Filament brand:
AzureFilm
Filament color:
Purple
Filament material:
PLA
Notes:
Additional material needed, I listed what I used:
- ruthex RX-M3 x 5,7 threaded inserts for screwholes, (ASIN: B08BCRZZS3)
- insert soldering tool (ASIN: B0CQXG444N) and iron
- ISO 7380 M3-0.5 x 8mm screws for front and back plates
- ISO 7380 M3-0.5 x 6mm screws to mount ITX board
- 2 pushbuttons for power and reset VISSQH (ASIN: B08G49GVQV)
- 2 colored LEDS 2 x 5mm for power and disk activity CHANZON (ASIN: B0BV3GZFVK)
- a flat cable with dupont connections (ASIN: B07KYHBVR7)
Tips:
- print using a brim for the front and back plates to prevent warping
- for nice effect use a textured PEI plate
- first assemble the back io shield, the 2 sides and a bottom plate, then install the ITX board and finish with the top panel and front plate
- if you use an ASRock N100DC-ITX board, have a look at my cooling solution I also published here https://www.printables.com/model/784278-n100dc-itx-fan-mount

Tags

case hexagonal ITX mini-itx

License

CC BY-NC-SA

ITX-hexBOX
by r3boot is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

ITX六边形盒子3D模型

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

凯弗·鬼魂追踪者
2024-01-18
原始控制舱
2024-03-25
Woods Mower 30922 护盾保持者
2024-04-24
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座
2024-04-29
F1赛船3D模型固定文件
2024-05-08

最新模型