LTT 短款螺丝刀夹持器 60/48/36/24/12 毫米 V6.3

LTT Screwdriver "shortie" 60/48/36/24/12 Bit Holder V6.3

2023-03-26 19:04:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

A box I designed to store the extra 20mm driver bits for the LTT screwdriver from lttstore.com. There are 60, 48, 36, 24, and 12 bit variants, and I made two variants of the 36 bit box to give a little more flexibility for size in that middle ground. Was designed for up to 60 bits as LTT currently has 6 different sets of 12 bits, so you can fit up to 5 sets in the case with the 6th in the driver handle. If you are looking to store one of each bit LTT offers currently, a 48 bit case is the size you will want

To assemble, use 4 M220 for the back hinge and the lower latch catch, and 2 M320 screws for the latch hinges.

I have a file with all the pieces in it for illustration, but I wouldn't recommend printing it all together as the latches sometimes pop off the build plate mid print.

DISCLAIMER

I have only printed the 64 and 48 bit versions for myself, so if there are any issues noticed with the smaller cases please feel free to comment/dm me and ill do my best to rectify them. All my modeling has been done in Tinkercad. THIS WAS PRINTED IN PLA. Using other plastic types I cant say if the shrinkage when cooled will interfere with fitment

LTT 短款螺丝刀夹持器 60/48/36/24/12 毫米 V6.3

朋友，你觉得上面这个模型，属于下面的哪个分类？