洗碗机K杯架
dishwasher K-cup holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
If you use those DIY KEURIG K-cups, then you know how annoying it is to clean them. After the grounds dry you can never shake out all the grounds. Running them under the faucet is a pain. But you can’t just throw them into the dishwasher. They will just bounce around and most likely retain grounds. They must remain in an upside down position to get clean and wash off the oils.
Enter the Dishwasher K-cup holder.
This little job will hold the cup secure on one of the upper level tines and will make sure all the grounds and oils are cleaned out. Just print and snap it in.
Print Settings
- Printer brand:
XYZprinting
- Printer:
da Vinci Super
- Rafts:No
- Supports:No
- Resolution:.20
- Infill:50% or Higher
- Filament brand:
any
- Filament color:
any
- Filament material:
ABS, ASA, PET-G
- Notes:
Not sure is PLA will hold up in the dishwasher temps
Tags
License
dishwasher K-cup holder
by Norm202 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
2023年度EDC手镯饰品2023-05-10 -
微比特 V1 和 V2 移动套装2024-01-17 -
末世未来人类防卫军：火炮部队（FDM友好版）2024-04-04 -
拒绝的手势2024-04-19 -
蚂蚁试管巢穴 - 试管通道 - 阿芙罗狄特巢穴2024-04-28
最热下载
-
Valorant 杰特的姿态2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
螺旋锥形手玩具（全新）2024-05-08
最新模型
-
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
鞋带锁2025-07-17 -
艺术雕像（女性）2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
