Astragal Boot for French Door

2024-03-28 06:27:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement astragal boot for a Reliabilt french door sold at Lowes (it's about 10 years old - I don't know what the model # is). When the top and bottom boots on my door failed and I was not able to find replacement parts, I forged my own out from TPU and PLA.

The top boot is PLA with the fins printed from TPU. Simply slide them into the tracks and install to the top of the door. The bottom boot has a thin base of PLA, with the rest of the fins being TPU (printed with a filament change around 1-2mm). If printing this again, I would probably just print the whole bottom boot from TPU. The PLA sections that interface with the other door broke off fairly quickly (the TPU has been going strong for 2 years now).

I have included the Fusion360 files in case you need to make changes for your specific door.