5加仑抽水桶固定装置

5 Gal Bucket Siphon Hose Clip

2023-03-26 19:05:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This clip was designed to hold an aquarium siphon hose firmly to a 5 gallon bucket. I took inspiration from model created by jtwlo http://www.thingiverse.com/thing:4587307

I liked the design but because it can be only printed (without support) with layers running perpendicular to the arm clip, it can snap there. Also I wanted something a little more compact. In my design the clip can be printed on its side so the layers will run parallel with arm clip to give it more strength. My buckets were bought from the big blue box store. I have several and the top lip height varies from bucket to bucket but it hovers around 60mm. I have included files for 58mm, 59mm, 60mm, 61mm, and 62mm because of the variations. If it prints out slightly short you can simply cut a notch out from the lip bottom with a sharp blade and carefully shave off a few mm. The hook on the end has some small grooves and will help it snap into place.

5加仑抽水桶固定装置

朋友，你觉得上面这个模型，属于下面的哪个分类？