Endecker 3 V3 SE 滚筒保持架

Ender 3 V3 SE Spool Roller Holder

2024-03-28 11:24:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello!

I made a spool roller for the E3v3SE because the stock spool holder tugs on the spool way too much which is potentially bad for the extruder.

Designed a shaft with a single threaded end to fix it from the back with two bearings to hold the spool.

Included the step files as well if you want to tweak the design as per your printer tolerances. The bearings should be good enough for a standard spool size. I recommend loosening the bearing a bit in post processing by spinning it a few times before use.

You can pair this with your filament guide of choice :)

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
15%
Filament brand:
Creality
Filament color:
White
Filament material:
PLA
Notes:
Special Note:
{Don't use tree supports for the bearings as they will be very difficult to remove and keep the “On build plate only” option ON}

Post-Printing

Bearing support removal

By keeping the support only on build plate option, you only have to remove the support on the bottom of the bearings.

Also free the bearing by spinning it a few times

Assembly

Mount the shaft by replacing the stock one and screwing the cap on the back to the threaded end.
Mount the first bearing and push it towards the end, the tolerances could be tight so feel free to force it if needed.
Mount the spool to the shaft with the bearing, after which insert the second bearing and push it as much as you can.
Place the top cap on the shaft and you're done :)