TwoTrees钻石加强版直接挤出器升级
TwoTrees Sapphire Plus direct extruder upgrade
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Before mounting on printer there should be inserted 4 M3 threaded inserts into "adapter" part.
Because of extended ending of "adapter" part there is slightly less move on Y-axis, so before printing big parts make shure to change max Y travel in settings and slicer.
"adapter" part has thick wall on the other side of hotend mount to mount BLTouch in future updates.
Between hotend and DualDrive there is short PTFE tube to ensure that filament won't be bent during print.
Direct drive project uses mostly old parts, but there are a few new ones:
- 4 x ISO 7380 M3x10 screws to mount adapter part to carier
- 4 x DIN 7991 M3x10 screws to mount custom extruder holder to adapter
- 4 x DIN 125-1 M3 washers for ISO 7380 screws
apart from that there should be soldered or bought extensions for extruder motor and filament runout sensor wiring.
in future parts will be updated with BLtouch mount and wiring mount
Print Settings
- Printer brand:
Two Trees
- Printer:
Two Trees Sapphire Plus
- Rafts:Yes
- Supports:Yes
- Resolution:0,4
- Infill:20
- Filament brand:
Devil Design
- Filament color:
black
- Filament material:
ASA
- Notes:
Printed with 0.6 nozzle.
License
TwoTrees Sapphire Plus direct extruder upgrade
by Speedfel is licensed under the Creative Commons - Public Domain Dedication license.
相关内容
联系我们
热门推荐
-
蜗牛壳可附着的有骨骼软体动物模型2023-03-26 -
便携式RGBWLED管2023-04-15 -
监控架适用于Flexi储物架2024-01-15 -
捷克斯洛伐克社会主义共和国时期的电话亭3D模型2024-03-19 -
3MM 100PC 珠状计数器2024-04-01
最热下载
-
ZTE MU5001 上位电容器2024-01-10 -
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。2024-03-18 -
Dado - 立方体模型2024-03-24 -
吸血鬼领主（免费D&D小模型）2025-07-15
最新模型
-
Gaggia压力计磁铁套装2024-05-08 -
摄像机装备2024-05-08 -
柔软安全的大型模型箭头部2024-05-08 -
显卡支持2024-05-08 -
美国长老教会十字架3D模型2024-05-06