简单的电子电路箱（以LED为例）

SIMPLE ELECTRONIC CIRCUIT BOX (LED)

2024-03-29 04:09:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an electronic school project; the assignment is to make a simple circuit connection, so I make a led connection in series. Everything is made by me from the design, the schematics and the assembling of this project.

Print Settings

Printer brand:
Anet
Printer:
A6
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
30-50%
Filament brand:
The brand of your choice
Filament color:
Color of your choice
Filament material:
ABS or PLA
Notes:
This is a V1 for a school project

How I Designed This

The Design

I design my project first in a paper then refine it in FUSION 360 and for the gcode i use CURA

Standards

NGSS CCSS

Overview and Background

Lesson Plan and Activity

Materials & Tools

SIMPLE ELECTRONIC CIRCUIT BOX 1 ON/OFF Switch 3 LEDS (Or the quantity you want) 1 piece of PCB Board 1 9v Battery or 2 18650 Some wire 1 screw for plastic or metal TOOLS: Soldering iron Flux Soldering Wire LEAD FREE Drill and drill bit

Materials Needed

Simple Led Electronic Circuit

For this project you will need to download and print this project box then you'll need some led connected in series. Beside that you have to get an On/Off switch and a 9V battery or 2 18650. Connect everything in series with the exception of the 18650 ( if you will use this type or battery, this ones will be connected in parallel). Make sure to make a good soldering connection.