2x2式唇膏夹子
Chapstick Holder 2x2
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix of a chapstick holder I found on printables. I asked my wife and she said that for her 6 chapsticks was too many, but 4 would be perfect lol. So here you go. Stick your chapstick in here and stick this on your nightstand so they don't roll away. Props to anyone who actually keeps track of a single chapstick long enough to actually finish one.
Original: https://www.printables.com/model/24585-chapstick-holder
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V3 KE
- Rafts:Doesn't Matter
- Supports:No
- Resolution:.20
- Infill:15%
- Filament brand:
Any
- Filament color:
Any
- Filament material:
PLA
- Notes:
The holes were designed to give just the tiniest bit of wiggle room on the bottom. If you prefer a tighter fit (the original you had to cut some of the bottom wrapper off to get it to fit), scale it down to 98%, possibly down to 95%.
Tags
License
Chapstick Holder 2x2
by rampersandon is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
鸟夜灯2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
索尼爱博 ERS-210/220机器人狗 18650替用电池盒2024-01-14 -
Walmart Sonic Toothbrush 'Foot'2024-04-17 -
力量感十足的宙斯3D模型2024-04-29
最热下载
-
Arduino或5V继电器控制板固定架2024-04-02 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
幻想磁力2024-05-03 -
Enders 3版控制面板2024-05-08 -
比基尼模型2025-07-16
最新模型
-
静音无空气乒乓球球拍，低噪音2025-06-21 -
Enders 3版控制面板2024-05-08
-
为我的教学2024-05-08 -
通用徽章模型2024-05-08 -
泡泡魔杖瓶架2024-05-06