安杜尔3 S1/S1 Pro/S1 Plus线材粉尘过滤器改进版

Ender 3 S1 / S1 Pro / S1 Plus - Filament Dust Filter (Remix)

2023-03-26 19:10:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Modded the Threaded Dust Filter by Kezat so it would be compatible with the Creality Sprite extruders.

The original design is awesome because, unlike other designs I've seen, with this one, to apply the filter you don't have to completely remove the filament from the extruder or any other parts.
nAlso, compared to other designs, this design is just filament and a sponge, the others normally require additional material like screws, nuts, magnets, etc.

For this and any other printer accessories or mods, I recommend that you use PETG or any other high temp resistant material.
nSince this filament filter is so close to the extruder, I didn't want to risk any melting from the filter material itself.

安杜尔3 S1/S1 Pro/S1 Plus线材粉尘过滤器改进版

朋友，你觉得上面这个模型，属于下面的哪个分类？