3dsjs

Ladeschale充电架

Ladeschale für Fontastic Essential Powerbank und Handwärmer Dockingstation mini USB docking station charging cradle 5V 4000mAh 5200mAh PB32

2024-03-30 00:35:25

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Ladeschale für Powerbank PB32 und Geräte mit anderem Label aber gleicher Bauform (L102mm x B60mm x T24mm)
Benötigt wird ein Micro USB Kabel, welches am besten zuerst in die Powerbank gesteckt wird und dann mit Heißkleber in den Kanal geklebt werden kann.


Charging cradle for Powerbank PB32 and devices with a different label but the same design (102mm x 60mm x 24mm)
A micro USB cable is required, which is best plugged into the power bank first and then glued into the channel with hot glue.

Tags

License

CC BY-NC

Ladeschale für Fontastic Essential Powerbank und Handwärmer Dockingstation mini USB docking station charging cradle 5V 4000mAh 5200mAh PB32
by Torge3D is licensed under the Creative Commons - Attribution - Non-Commercial license.

Ladeschale充电架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

猜你喜欢