橡皮筋夹紧装置 v2 (Remix)

Rubberband clamp v2 (Remix)

2024-03-30 04:24:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of ronisandler1's original design of a rubberbad clamp.

The original rubberband clamps were the best ones i could find on multiple platforms. When printing them I had some ideas of improvements and the result is this remix.

Modifications to the original design (see pictures):

I inreased the size of the cap stoppers and relocated them slightly as they didn't work well for me in the original design
I added a pattern to the handles for more grip.
I redesigned new caps that are a bit stronger than the original ones and fit tighter to the handles. I also used another pattern at the clamping surface.
As I had troubles with bed adhesion when printing the caps, I also included the stl file "Caps_CustomBrim_0p2" that includes a pre designed brim that is easily removeable. It has a thicknes of 0.2mm, so it is only one layer. You shouldn't need it if your printer is better tuned than mine or if you are printing the clamps in a larger scale ("Cap.stl" doesn't include the Brim).

As in the orginal design, also this remix is easily scaleable. I already tried 100%, 125% and 150% and they all work fine. Let me know if you try other sizes.

I don't want to admit how many iterations these modifications took me to get them just right, but it was a fun process and the original clamps were already really good.

Please share your makes!