Dumbbell

2024-03-30 05:21:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I took the screw section and sliced off the handle, replacing it with a tube for the handle and copy/pasted the screw end to make a Dumbbell.

95mm handle spacing which is enough for me and as a whole is just enough space to print upright on a Ender 3 v2

72mm screw length - my weights are a little over 52mm thick which with the nut leaves about 2mm left

Note:
I have yet to test print and test this (will do that tomorrow or so with petg as printing something else atm) - I have used the kettlebell with 7.5kg and it has handled that extremely well, also it's over a year old (still going strong as used Creality pla)

I don't have any small sized weights and have been using weights meant for a Bench press which are oversized for the Kettlebell but it fits and will be the same for this Dumbbell.
The Kettlebells handle is a tad small for me but still does the job, I wanted to see what a Dumbbell could handle and also petg been slightly stronger it seems like a good idea.

Here's the link for the Kettlebell;
https://www.thingiverse.com/thing:2086852

P.s The person that made the Kettlebell - Thank you.