超级双 M2C2 型 MSA 舒适型过滤器（来自安利威尔北方）

Ultra Twin m2c2 MSA Comfo to Honeywell North filter

2024-03-30 22:15:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an adapter for the Ultra Twin respirator by MSA, and replaces the less modern Comfo (~75mm) cartridges and adapts them to use Honeywell. I am also including the gasket for the Honeywell filters.

IMPORTANT:

It is recommended that you print at 100.9% scale for the initial print, then scale from there. The part is slightly undersized and I do not know how to scale it since this is my first design.
The gasket MUST be printed in a flexible material, such as TPU/TPE. I used Hatchbox TPU.

Disclaimer:
I make no warranty, express or implied, on these parts. Additionally, I am not liable for any injury or death that may result from the use or misuse of these files. Every 3D printer is different, and as such has different tolerances. You are responsible for using good judgement to ensure your own health and safety when using these in any CBRN environment; change the material if necessary and ensure a proper fit/seal of the mask using peppermint oil (vapor) or sucralose (particle) spray.