改进型锁定系统：Ambitful软盒环式挂钩

Modified locking system for Ambitful softboxes ring mount.

2024-03-31 01:23:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I felt the need of designing this because of the impractical way Ambitful placed the locking screw for the softbox orientation. It required to access the inside of the box to untighten the screw knob, set orientation, then tighten the knob.
On other softboxes, this screw is on the outside, so much easy to access and modify orientation.

I designed a button head with cap to reuse to original H M5 screw, and another part that comes inside for clamping together the mount and adapter rings. The inner locking part requires an additional M5 standard nut to complete the set. Original washer and metal knob are no longer used.

Note: The original metal knob could be reused but it's a bit long so does not fit ideally on the outside, depending on the lighting device and mount type used.
the low profile of the printed button head provides easy access for fingers and allows not to hinder the closing of the sides of the canvas.