35毫米胶片扫描夹（负片版）简化版本

Negative_35mm_Film_Scanning_Holder simpler version

2024-03-31 02:20:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

35mm film negative scanning holder / carrier. Film may be tight and you may need to run some paper through the slots to clear them following the print.

Could potentially use a slightly larger viewing window if you prefer to have more borders present in the frame/scan.

I've simplified the design and removed the moving parts. Since the piece is symmetrical, two identical pieces have to be printed. The alignment pins can be made from a roll of paper, a roll of film or even a piece of pencil. The cut-out at the top is for inserting the slide frame, so it is possible to scan the slide frame without glass. I reduced the wall thickness to 2 mm, which is also sufficiently rigid for the job.