Lightweight 15 inch monitor stand (for laptops)

2024-03-31 03:03:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Lightweight 15 inch monitor stand (for laptops)

Summary

This is a lightweight stand for a 15 inch portable monitor that can stand behind your laptop and elevate it for a compact dual screen setup. This is meant to be used on a desk, it doesn't actually attach to your laptop and will be of no use on a lap. It's designed to be disassembled and reassembled quickly with little dovetail joints. It packs together into a neat bundle that can be held together with a couple Velcro cable ties and weighs approximately 87 grams with one crossbeam or 104 grams with two.

There is also an included test piece model, that has only the dovetail joint. This is useful for calibrating your print settings quickly before printing anything big to make sure that the parts will fit.

The parts are designed to just barely fit onto a (default Ender 3 size) 235x235mm build plate diagonally. Very minimal supports are probably required for the dovetail segments. Also you should be able to scale all the models up by about ~15% to elevate the additional screen enough to fit behind a 17 inch laptop screen.

The dovetail joints are slightly angled to make inserting them easier and fit more snugly.
There's little ridges on the feet so you can put another monitor angled up against the legs instead of your laptop, so you could have two monitors on this stand.
The clips holding onto the monitor up top should bend enough to hold your monitor in there fairly firmly, but depending on the thickness of your monitor, you could also use a bit of heat (from a lighter for example) to bend them further in or out to customise the grip strength without having to reprint anything.