夹持式工具夹子
Holder for Combination/Insulated Plier
2024-03-31 04:57:41
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A remix from ZnaKeZ's Plier holder for holding bigger pliers (combination/insulated/electrician pliers)
https://www.thingiverse.com/thing:5833600
Changes:
- the backplate is smaller
- one hole is now below the plier holder
- the holder is longer (22mm) to hold an electrician combination plier that is about 20mm thick. Much thicker than the usual pliers for 3d printers.
Support is needed to hold the larger bit of the holder (tree support is suggested).
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:Yes
- Infill:20%
- Notes:
I printed with 20% infill and generic PLA with no problem. If needed stronger holder consider increasing the infill.
How I Designed This
I remixed this from the original one just slicing, resizing, and reassembling cut parts within Bambu Studio.
License
CC BY-NC-SA
Holder for Combination/Insulated Plier
by orion434 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
德威特20V工具架2023-03-26 -
复制版Hayden章鱼模型2024-04-04 -
Bosch 电动车电池固定架 / 充电站2024-04-16 -
力量感十足的宙斯3D模型2024-04-29 -
女式凉鞋2025-07-16
最热下载
-
Philips 马拉松 FC9225 轮子 飞利浦 Marathon FC9225 轮子2024-03-31 -
NA Miata车灯遮光条折叠机构顶盖2024-04-15 -
幻想磁力2024-05-03 -
中指2025-05-17
最新模型
-
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
Cub Cadet Ignition Key2024-05-08 -
MW4 Madcat MKII 3D模型2024-05-08 -
Shift Collar Boot Support - 可调节领口靴子支撑2024-05-06 -
车盖扣环衬套2024-05-06