Sith战士头盔设计适配Ender 3打印机

Sith Trooper Helmet Fitting Ender 3

2024-03-31 05:40:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Sith战士头盔设计适配Ender 3打印机

Sith战士头盔设计适配Ender 3打印机

Summary

I cutted down vek3d's helmet for it to fit on ender 3 like printers. I also made a face version that allow breathing better so glasses wearers won't end up with fog on their glasses.

Post-Printing

I started by gluing all the parts together using cyanoacrylate and epoxy glue then i sanded it with 180 grit wall sandpaper and i covered it all with 3M acryl-green glazing putty that i disolved in acetone to apply it wioth a paint brush to fill in layer lines. I then wet sanded the helmet with 240 grit wall sandpaper and primed and painted it with automotive primer and paint.

Here are the videos i used to make it :

Tags

cosplay Cosplay helmet cosplay prop helmet prop props prop helmet sith trooper starwars Starwars helmet star wars

License

CC BY-NC-SA

Sith Trooper Helmet Fitting Ender 3
by KilianBLRD is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

Sith战士头盔设计适配Ender 3打印机

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Anycubic i3 Mega / Mega-S Marlin 1.1.9 定制固件 - 额外功能与质量优化
2023-03-26
压缩袋真空适配器
2023-03-27
HGLRC SECTOR D5 DJI ACTION 2 SUNNYLIFE NDPL滤镜支架20度
2023-04-08
Schildkröte Line Tank
2023-08-08
老板螃蟹 KGC-010
2023-09-08

最热下载

最新模型