Heng Long KV-1排气管道

Heng Long KV-1 Exhaust Manifold

2024-03-31 06:37:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a low-profile exhaust manifold to route smoke to the exhaust ports on the Heng Long 1/16th scale RC Tank.

As the tank comes from the factory, the smoke is routed through the tail light housing in the lower hull. It is supposed to exit the exhaust pipes on the upper engine deck.

I removed the solid, non-functional plastic exhaust tips and replaced them with functional hollow metal ones from Forgebear Tanks.

However, you cannot route tubes directly to the pipes even so, because one of the electric motors is very close to the exhaust tip.

So, you have to grind the downspouts flush with the bottom of the engine deck. Then you hot glue this low-profile exhaust manifold over the exhaust pipes, and route a tube from the manifold to your smoker.