Top Fin Pro 30 美蒸汽容量过滤器盖

Top fin pro power filter 30 gallon lid with drip protection

2024-03-31 09:14:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I had water on my floor, and I traced it to the poor lid design of the filter. The original lid loosely sits on top of the filter and the lip hangs over the edge of the filter box. Condensation and splashing builds up on the bottom of the lid and rolls to the edge. Depending on the angle of the filter, it can roll backward and drip down onto the floor.

This new lid inserts into the filter all the way around the filter housing, so condensation will all be guided back into the filter.

I made it for the 30 gallon version

Find the model in onshape here

Yes, my aquarium badly needs a clean, it's a 4 year Walstad. It's quite messy