Forstner森纳钻头壳体

Forstner Drill Bit Case

2024-03-31 09:29:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I bought some inexpensive Forstner bits and they did not come with a case, so I decided to make one.

This case is designed to fit the Warrior Forstner Bit Set by Harbor Freight Tools.

I used a skewer as a pin for the hinge. The pin needs to be 3mm in diameter and 142mm in length.

The case just friction fits closed and is nice and secure. Version 2 of the Bottom includes a place in the front to hold down the case.

Version 1 of the Top has an embossed label. More details below on how to print.
Version 2 of the Top has a space for Label to be glued in. More details below on how to print.

I have also included the Fusion360 file. I am a not an expert on Fusion so... ¯\(ツ)/¯

Print Settings

Printer brand:
Creality
Printer:
CR-6 SE
Rafts:
No
Supports:
Yes
Resolution:
0.4
Infill:
20%
Filament brand:
Inland
Filament material:
PLA
Notes:
For the Bottom:
Print upside down with supports.
I did 3 wall line count and 2x infill lines multiplier.

For the Top:
I did 2 wall line count and 1x infill lines multiplier.

Version 1:
I printed upside down so the text would print smoothly. Unfortunately this causes an ugly surface on the slanted top. Would only recommend if you don't care what it looks like or are going to prep and paint it.

Version 2:
I printed on its hinges and came out very well. Then I glued in the label.