NCE光源盒V2

NCE Light-it box V2

2024-03-31 10:26:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/hb7NhBdf9OL
Made to house a NCE "Light-it" Stationary decoder for use in Railway Signaling. Roughly clips on a 1/8" Brass tube of a signal stand

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Infill:
Yes
Filament brand:
Any
Filament color:
Black
Filament material:
PLA

Post-Printing

Clean out holes for wiring. Solder track feeders to bottom holes on the "Light-it", route through bottom holes of housing. Wire feeders from Light-it to your lights via a brass signal mast through a slot cut in the brass and run up to the signal head.
Also print HO Signal Base V2 from me, add the brass tube and the HO Dwarf Signal 2 Light from me as well to get a two light signal mast. You have to add your own ladder.