X英寸 Dahlgren 转向枪 3D模型

X inch Dahlgren pivot gun

2024-03-31 12:20:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

In July 1850, John Dahlgren submitted a proposed armament for frigates consisting of 6 10 inch shell-guns on pivot carriages on the spar deck, and 26 9 inch shell-guns on the gun deck.
The Navy opted for 8 inch shell guns and 32# guns on the gun-deck, and 2 10 inch pivots on the spar deck.
This model is the 10 inch pivot gun as proposed. Dahlgren's drawing of a Traversing Carriage with the gun altered to look like a Dahlgren gun is included, along with the Traversing Gun diagram from the "Instructions" of 1852.

The gun is modled in 1:36 scale (1 inch = 3 feet) and can be scaled down as far as 1:96 scale

Figures in images are purchased and not included or available from me

To figure out rescaling in your slicer; divide 36 (the model is 1:36 scale) by the scale you want; for instance: 36/76 = .474 or 41%; 36/96=.375 or 38%, etc.