Vkb 滑动开关

Vkb gladiator paddle switch

2024-03-31 20:42:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

To use this design first download this, https://www.thingiverse.com/thing:5025307

this is a clamp that will go on the previously linked extension that provides a paddle switch for the vkb gladiator, to make this work you will need 7 m3x20 bolts and 6 nuts, you will also need a limit switch similar to the ones that are on a regular 3d printer and lastly you will need someway of sending the button press to your computer.

To send the signals to my computer i have just wired them into a UFC panel i have made but there is an infinite amount of ways of doing it, for example you could wire it up to an old mouse button and bind it to something else in the software, you could use an arduino leonardo or pro micro or you could use a Leobodnar bbi board.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V2 Neo
Supports:
Yes
Resolution:
0.2mm layer hight
Infill:
60%
Filament brand:
sunlu
Filament color:
any colour you like
Filament material:
Pla+
Notes:
print the clamps facing up and the handle on its side to maximise strength