风筝划船浴缸玩具

Wind-up Paddle Boat Bath Toy

2024-03-31 22:08:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wind up paddle boat bath toy. Also compatible with hot tubs, pools and most other bodies of water!
This model was design to work off the printer with no glue, fasteners or post processing needed. It prints in PLA with no supports at a 0.2mm layer height and uses about 70g of filament. All parts are per-oriented for printing. I use glue on the bed to ensure the small parts stick but I've also printed directly on textured PEI plates with good results on other printers. The windshield and bow deck parts should have brims since they have very little contact with the bed. There is a .3MF file for an X1 carbon with the brims turned on for those parts. I've never printed this exact .3MF file but this is generally how I group the parts when printing this model. Mainly for the color scheme. There are extras of the smaller parts in this .3MF file since it doesn't take much of a defect to ruin a small part and it doesn't add much time or filament to the print. There are .step files and .stl files. Step files are the preferred file to print if your printer supports it but for the bow deck part I recommend you print the .stl version. Solidworks created a slightly bumpy mesh on the bottom surface of this part during the export to .step that I couldn't correct. You don't see it in the finished print but when you compare them the .stl print looks a bit cleaner so that's is the one I print. The .step zip file archive has the .stl version of that one part so you don't have to download it separately. There is a .step file of the entire model for easy import to CAD. There is an instruction .pdf with printing, assembly and operating instructions. I'll try and keep an eye on the comments in case there are are issues I can help with. Enjoy!

Print Settings

Printer:
X1 Carbon
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament brand:
Any
Filament color:
Any
Filament material:
PLA
Notes:
A default 0.2mm profile is all that is needed. No supports needed. Bow deck and windshield parts need brims. All other parts should be printed without brims.