1987-1992 Mk3 Supra 防火墙支架
1987-1992 Mk3 Supra Harness Firewall Clip
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Firewall Clip I Made To Clean Up The Wiring On My Mk3 Supra LS Swap.
These Clips Are Designed To Run 1/2 Loom Along the Upper Side Of The Firewall Lip On 1987-1992 Mk3 Supras. This Part May Work For Other Models But Is Not Guaranteed.
Zip Tie Mounting Hole Is 3mm x 2mm, Its Not Necessary But When In Rome Make It Cleaner
These Bite The Firewall Lip QUITE Well, Gently Wiggle Up And Down Until It Snaps Into Place. DO NOT SMACK ON, Trust Me It Breaks. To Remove Wiggle Again But Mostly Downward.
Once Attached It Can Be Slide Along The Firewall For Perfect Placement. BE CAREFUL Firewall Edge May Be Sharp.
It Took 7 Of These To Span The Length Of My Firewall To What I Wanted And I Broke 1
Printed In PETG, Im Expecting Engine Temps To Warp That This Summer, Then Ill Print In Fireproof ABS.
I Also Have Custom Heater Hose Clips For MK3 Supra LS Swaps
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK3
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:.2
- Infill:60% Gyroid
License
1987-1992 Mk3 Supra Harness Firewall Clip
by DSchnupp20 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
2023年度EDC手镯饰品2023-05-10 -
热轮车汽车展示架，模块化设计，可连接安装2023-09-07 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04 -
HWS用参数化偏移钥匙孔钩2024-04-13 -
巨魔头像 012024-04-21
最热下载
-
Valorant 杰特的姿态2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
Flex Dino钥匙链2023-03-26 -
拒绝的手势2024-04-19 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16
-
私密羞羞娱乐骰子2025-07-15