贝壳结婚戒指盒

Seashell engagement ring box

2024-03-31 23:20:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Github repo with OpenSCAD code: https://github.com/elfalko/shell-ringbox-openscad

Printing

This model is far from perfect. Visit the github and take a look at the TODOs to get a better overview what is missing, or comment to motivate me to fix it myself. That said, it was good enough to get me a yes as an answer :D

2x ./shell.scad scaled by 160% in all directions! (I did not want to rerender this part as it took hours on my machine)
1x ./ringbridge_large.stl
1x ./ringcradle_large.stl (you might want to change the scad model of the ring until it fits your ring perfectly. You can print this part over and over until it is perfect and your ring does not fall out. Or just secure your ring in with white electrical/medical tape...)

Print the shell with the inner side towards the print bed with supports and hinge and cradle lying flat on the side.

I used cut off nails as the axles for the hinge, neodym magnets left over from another project and an M4 screw to mount the ring cradle.

If you print this, please post a make! I always get a kick out of seeing my designs out in the wild!

贝壳结婚戒指盒

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

任天堂Switch便携式充电架
2023-03-26
Geeetech A10 DD Orbiter 2.4 E3dV6
2023-04-21
可爱的小猫耳饰
2023-06-26
Hikvision DS-KV6113 45度角支架
2024-01-01
丰田RAV4车门座椅夹板螺栓更换
2024-04-20

最热下载

最新模型