巨像炮 Lite 67 中型摄像机

Macro Cannon Lite 67 Medium Format Camera

2024-04-01 03:54:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I'm still working on this. If you have any questions you can comment or message me here. You can also find me on Reddit

I originally made this a fixed 5x magnification Macro camera using the Fujinon W 210mm f 5.6 Large Format lens in normal orientation. After trying it in reverse it works even better.
But you can use almost any 35mm medium format or large format camera lens you have. You will need to add far less extension for shorter focal lengths. A Reversed 50mm for a 135 camera takes only about 2x-3x the focal length to cover 6x7. The more you add the more magnification you gain. This works very well with enlarger lenses such as the El-Nikkor ones.

This camera uses Graflex Lens boards. I already made some for download Here

If you use EL-Nikkor enlarger lenses in reverse I made a slip-on lens hood Here

You will need a Scotch Mailing Tube, 1 Tube, 4 in x 48 in They cost about $8 at a FedEx store or about $22 on Amazon. Unfortunately, they ship the tube without packaging from Amazon.

I used M3 and 1/4x20 inserts in a few places as well as m3 nuts and m3x8mm bolts for the front standard and film back holder. The magnets are 10mm x 3mm

One last thing I used was adhesive-backed black felt or flock for the inside of the tube as well as a piece for both the film back holder and ground glass holder. Only use the felt on the two. Don't use any on the rear standard or the focus will be off. The ground glass should be pointed rough side towards the lens. Cut your glass 61mm x71mm. The file names have an "x" at the end telling you the number of prints required.

When using this camera I would suggest not using a shutter. I used a set of speed lights and strobes with a wireless trigger. Place both the camera and subject on the same leveled surface. Focus by moving the camera back and forth with the ground glass back installed. Once Focus has been found, frame your shot and turn off the lights. Remove the Ground glass holder and install the film back holder. Pull the dark slide with lights out. Trigger the strobes/speed lights then insert the dark slide. Cycle/advance your film back and repeat.