SimpliSafe 防护门锁传感器天气防盖

SimpliSafe Entry Sensor Weather-Resistant Cover

2024-04-01 05:21:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this weather-resistant enclosure for a SimpliSafe (version 3) entry sensor because I have a pole barn with metal walls which prevents me from putting the entry sensor on the inside of the door. I can’t believe that SimpliSafe (or some enterprising person) hasn’t already created a weather-resistant/weatherproof enclosure for the entry sensor.

The roof piece is very likely superfluous, but I figured why not? I don’t see any need to protect the magnet side of the sensor since there are no electronics in there. I’d highly recommend using screws to secure both sides of the sensor to the door and door frame. If you’ve lost your screws, SimpliSafe support tells me that the screws are 1/8” X 1/4”, but it wouldn’t be a bad idea to go to 1/8” X 1/2” for the screws securing the larger piece to the door frame.

I used drywall anchors to create a “reusable” hole to screw the 3D printed piece to the doorframe, since it will need to be removed whenever a battery change is necessary. (I messed up the positioning of the bottom screw and then broke a bit of it off. If you aren’t an idiot like me, your install will look cleaner.)

Finally I highly recommend using PETG since this is outside. Definitely not PLA if it’s in any sunlight.

Good luck!